class Amazonite::Sns::PublishInput

Overview

Input for Publish action.

Defined in:

sns/publish_input.cr

Constructors

Instance Method Summary

Constructor Detail

def self.from_xml(node : XML::Node) : self #

[View source]
def self.new(message : String, topic_arn : String | Nil = nil, target_arn : String | Nil = nil, phone_number : String | Nil = nil, subject : String | Nil = nil, message_structure : String | Nil = nil, message_attributes : Hash(String, MessageAttributeValue) | Nil = nil, message_deduplication_id : String | Nil = nil, message_group_id : String | Nil = nil) #

[View source]

Instance Method Detail

def ==(other : self) #
Description copied from class Reference

Returns true if this reference is the same as other. Invokes same?.


def hash(hasher) #
Description copied from class Reference

See Object#hash(hasher)


def message : String #

The message you want to send.

If you are publishing to a topic and you want to send the same message to all transport protocols, include the text of the message as a String value. If you want to send different messages for each transport protocol, set the value of the MessageStructure parameter to json and use a JSON object for the Message parameter.

Constraints:

  • With the exception of SMS, messages must be UTF-8 encoded strings and at most 256 KB in size (262,144 bytes, not 262,144 characters).

  • For SMS, each message can contain up to 140 characters. This character limit depends on the encoding schema. For example, an SMS message can contain 160 GSM characters, 140 ASCII characters, or 70 UCS-2 characters.

If you publish a message that exceeds this size limit, Amazon SNS sends the message as multiple messages, each fitting within the size limit. Messages aren't truncated mid-word but are cut off at whole-word boundaries.

The total size limit for a single SMS Publish action is 1,600 characters.

JSON-specific constraints:

  • Keys in the JSON object that correspond to supported transport protocols must have simple JSON string values.

  • The values will be parsed (unescaped) before they are used in outgoing messages.

  • Outbound notifications are JSON encoded (meaning that the characters will be reescaped for sending).

  • Values have a minimum length of 0 (the empty string, "", is allowed).

  • Values have a maximum length bounded by the overall message size (so, including multiple protocols may limit message sizes).

  • Non-string values will cause the key to be ignored.

  • Keys that do not correspond to supported transport protocols are ignored.

  • Duplicate keys are not allowed.

  • Failure to parse or validate any key or value in the message will cause the Publish call to return an error (no partial delivery).


[View source]
def message=(message : String) #

The message you want to send.

If you are publishing to a topic and you want to send the same message to all transport protocols, include the text of the message as a String value. If you want to send different messages for each transport protocol, set the value of the MessageStructure parameter to json and use a JSON object for the Message parameter.

Constraints:

  • With the exception of SMS, messages must be UTF-8 encoded strings and at most 256 KB in size (262,144 bytes, not 262,144 characters).

  • For SMS, each message can contain up to 140 characters. This character limit depends on the encoding schema. For example, an SMS message can contain 160 GSM characters, 140 ASCII characters, or 70 UCS-2 characters.

If you publish a message that exceeds this size limit, Amazon SNS sends the message as multiple messages, each fitting within the size limit. Messages aren't truncated mid-word but are cut off at whole-word boundaries.

The total size limit for a single SMS Publish action is 1,600 characters.

JSON-specific constraints:

  • Keys in the JSON object that correspond to supported transport protocols must have simple JSON string values.

  • The values will be parsed (unescaped) before they are used in outgoing messages.

  • Outbound notifications are JSON encoded (meaning that the characters will be reescaped for sending).

  • Values have a minimum length of 0 (the empty string, "", is allowed).

  • Values have a maximum length bounded by the overall message size (so, including multiple protocols may limit message sizes).

  • Non-string values will cause the key to be ignored.

  • Keys that do not correspond to supported transport protocols are ignored.

  • Duplicate keys are not allowed.

  • Failure to parse or validate any key or value in the message will cause the Publish call to return an error (no partial delivery).


[View source]
def message_attributes : Hash(String, MessageAttributeValue) | Nil #

Message attributes for Publish action.


[View source]
def message_attributes=(message_attributes : Hash(String, MessageAttributeValue) | Nil) #

Message attributes for Publish action.


[View source]
def message_deduplication_id : String | Nil #

  • This parameter applies only to FIFO (first-in-first-out) topics. The MessageDeduplicationId can contain up to 128 alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!"#$%&'()*+,-./:;?@[\]^_{|}~)`.

  • Every message must have a unique MessageDeduplicationId, which is a token used for deduplication of sent messages within the 5 minute minimum deduplication interval.

  • The scope of deduplication depends on the FifoThroughputScope attribute, when set to Topic the message deduplication scope is across the entire topic, when set to MessageGroup the message deduplication scope is within each individual message group.

  • If a message with a particular MessageDeduplicationId is sent successfully, subsequent messages within the deduplication scope and interval, with the same MessageDeduplicationId, are accepted successfully but aren't delivered.

  • Every message must have a unique MessageDeduplicationId:

  • You may provide a MessageDeduplicationId explicitly.

  • If you aren't able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your topic, Amazon SNS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message).

  • If you don't provide a MessageDeduplicationId and the topic doesn't have ContentBasedDeduplication set, the action fails with an error.

  • If the topic has a ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.

  • When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication scope and interval are treated as duplicates and only one copy of the message is delivered.

  • If you send one message with ContentBasedDeduplication enabled, and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates, within the deduplication scope and interval, and only one copy of the message is delivered.


[View source]
def message_deduplication_id=(message_deduplication_id : String | Nil) #

  • This parameter applies only to FIFO (first-in-first-out) topics. The MessageDeduplicationId can contain up to 128 alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!"#$%&'()*+,-./:;?@[\]^_{|}~)`.

  • Every message must have a unique MessageDeduplicationId, which is a token used for deduplication of sent messages within the 5 minute minimum deduplication interval.

  • The scope of deduplication depends on the FifoThroughputScope attribute, when set to Topic the message deduplication scope is across the entire topic, when set to MessageGroup the message deduplication scope is within each individual message group.

  • If a message with a particular MessageDeduplicationId is sent successfully, subsequent messages within the deduplication scope and interval, with the same MessageDeduplicationId, are accepted successfully but aren't delivered.

  • Every message must have a unique MessageDeduplicationId:

  • You may provide a MessageDeduplicationId explicitly.

  • If you aren't able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your topic, Amazon SNS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message).

  • If you don't provide a MessageDeduplicationId and the topic doesn't have ContentBasedDeduplication set, the action fails with an error.

  • If the topic has a ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.

  • When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication scope and interval are treated as duplicates and only one copy of the message is delivered.

  • If you send one message with ContentBasedDeduplication enabled, and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates, within the deduplication scope and interval, and only one copy of the message is delivered.


[View source]
def message_group_id : String | Nil #

The MessageGroupId can contain up to 128 alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!"#$%&'()*+,-./:;?@[\]^_{|}~)`.

For FIFO topics: The MessageGroupId is a tag that specifies that a message belongs to a specific message group. Messages that belong to the same message group are processed in a FIFO manner (however, messages in different message groups might be processed out of order). Every message must include a MessageGroupId.

For standard topics: The MessageGroupId is optional and is forwarded only to Amazon SQS standard subscriptions to activate fair queues. The MessageGroupId is not used for, or sent to, any other endpoint types. When provided, the same validation rules apply as for FIFO topics.


[View source]
def message_group_id=(message_group_id : String | Nil) #

The MessageGroupId can contain up to 128 alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!"#$%&'()*+,-./:;?@[\]^_{|}~)`.

For FIFO topics: The MessageGroupId is a tag that specifies that a message belongs to a specific message group. Messages that belong to the same message group are processed in a FIFO manner (however, messages in different message groups might be processed out of order). Every message must include a MessageGroupId.

For standard topics: The MessageGroupId is optional and is forwarded only to Amazon SQS standard subscriptions to activate fair queues. The MessageGroupId is not used for, or sent to, any other endpoint types. When provided, the same validation rules apply as for FIFO topics.


[View source]
def message_structure : String | Nil #

Set MessageStructure to json if you want to send a different message for each protocol. For example, using one publish action, you can send a short message to your SMS subscribers and a longer message to your email subscribers. If you set MessageStructure to json, the value of the Message parameter must:

  • be a syntactically valid JSON object; and

  • contain at least a top-level JSON key of "default" with a value that is a string.

You can define other top-level keys that define the message you want to send to a specific transport protocol (e.g., "http").

Valid value: json


[View source]
def message_structure=(message_structure : String | Nil) #

Set MessageStructure to json if you want to send a different message for each protocol. For example, using one publish action, you can send a short message to your SMS subscribers and a longer message to your email subscribers. If you set MessageStructure to json, the value of the Message parameter must:

  • be a syntactically valid JSON object; and

  • contain at least a top-level JSON key of "default" with a value that is a string.

You can define other top-level keys that define the message you want to send to a specific transport protocol (e.g., "http").

Valid value: json


[View source]
def phone_number : String | Nil #

The phone number to which you want to deliver an SMS message. Use E.164 format.

If you don't specify a value for the PhoneNumber parameter, you must specify a value for the TargetArn or TopicArn parameters.


[View source]
def phone_number=(phone_number : String | Nil) #

The phone number to which you want to deliver an SMS message. Use E.164 format.

If you don't specify a value for the PhoneNumber parameter, you must specify a value for the TargetArn or TopicArn parameters.


[View source]
def subject : String | Nil #

Optional parameter to be used as the "Subject" line when the message is delivered to email endpoints. This field will also be included, if present, in the standard JSON messages delivered to other endpoints.

Constraints: Subjects must be UTF-8 text with no line breaks or control characters, and less than 100 characters long.


[View source]
def subject=(subject : String | Nil) #

Optional parameter to be used as the "Subject" line when the message is delivered to email endpoints. This field will also be included, if present, in the standard JSON messages delivered to other endpoints.

Constraints: Subjects must be UTF-8 text with no line breaks or control characters, and less than 100 characters long.


[View source]
def target_arn : String | Nil #

If you don't specify a value for the TargetArn parameter, you must specify a value for the PhoneNumber or TopicArn parameters.


[View source]
def target_arn=(target_arn : String | Nil) #

If you don't specify a value for the TargetArn parameter, you must specify a value for the PhoneNumber or TopicArn parameters.


[View source]
def to_query_params(prefix : String) : Array(Tuple(String, String)) #

[View source]
def topic_arn : String | Nil #

The topic you want to publish to.

If you don't specify a value for the TopicArn parameter, you must specify a value for the PhoneNumber or TargetArn parameters.


[View source]
def topic_arn=(topic_arn : String | Nil) #

The topic you want to publish to.

If you don't specify a value for the TopicArn parameter, you must specify a value for the PhoneNumber or TargetArn parameters.


[View source]
def validate! : Nil #

[View source]